 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SD2153 Transistors High gain amplifier transistor (25V, 2A) 2SD2153 Features 1) Low saturation voltage, typically VCE(sat) = 0.12V at IC = IB = 1A / 20mA 2) Excellent DC current gain characteristics. External dimensions (Unit : mm) 4.0 1.0 2.5 0.5 1.5 0.4 (1) 1.6 3.0 0.5 (3) 4.5 (2) (1) Base (2) Collector (3) Emitter 1.5 0.4 ROHM : MPT3 EIAJ : SC-62 Absolute maximum ratings (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature + + Symbol VCBO VCEO VEBO IC PC Tj Tstg Limits 30 25 6 2 3 0.5 2 150 -55 to +150 2 Unit V V V A(DC) A(Pulse) W C C 1 1 Single pulse, Pw=10ms 2 Mounted on a 40 40 t0.7mm Ceramic substrate Packaging specifications and hFE Type Package hFE Marking Code Basic ordering unit (pieces) Denotes hFE 2SD2153 MPT3 UVW DN T100 1000 Electrical characteristics (Ta=25C) Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Measured using pulse current. Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 30 25 6 - - - 560 - - Typ. - - - - - 0.12 - 110 22 Max. - - - 0.5 0.5 0.5 2700 - - Unit V V V A A V - MHz pF Conditions IC = 50A IC = 1mA IE = 50A VCB = 20V VEB = 5V IC/IB = 1A/20mA VCE/IC = 6V/0.5A VCE = 10V , IE = -10mA , f= 100MHz VCB = 10V , IE = 0A , f = 1MHz 0.4 1.5 Rev.A 1/2 2SD2153 Transistors Electrical characteristics curves 2 COLLECTOR CURRENT : IC (A) 10 COLLECTOR CURRENT : IC (A) 10mA 9mA 8mA 4mA 7mA 6mA 5mA 3mA 5 2 1 500m 200m 100m 50m 20m 10m 5m 2m 1m This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. 10k 5k DC CURRENT GAIN : hFE VCE=6V Ta=100 C 25 C -40 C 2mA Ta=100 C 25 C -25 C 2k 1k 500 200 100 50 1 1B=1mA 0 0 1 2 0 500m 1 1.5 1m 10m 100m 1 10 COLLECTOR TO EMITTER VOLTAGE : VCE (V) BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter output characteristics Fig.2 Ground emitter propagation characteristics Fig.3 DC current gain 1 500m COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 1 500m IC/IB=10 TRANSITION FREQUENCY : fT(MHz) 10000 500 200 100 50 20 10 5 2 1 1 2 5 VCE=6V Ta=25 C 200m 100m 50m 20m 10m 5m 2m 1m 1m 2m 5m 10m 20m 50m 100m 200m 500m 1 2 5 IC/IB=50 40 30 10 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 200m 100m 50m 20m 10m 5m 2m 1m 1m 2m This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. Ta=100 C 25 C -25 C This data are made from repesentative value of specific lot. The data do not indicate the worst value or guaranteed value. And we can not guarantee the value based on the data. 5m 10m 20m 50m 100m 200m 500m 1 2 5 10 20 50 100 200 500 1000 COLLECTOR CURRENT : IC (A) COLLECTOR CURRENT : IC (A) EMITTER CURRENT : IE (mA) Fig.4 Collector-emitter saturation voltage vs. collector current Fig.5 Collector-emitter saturation voltage vs. collector current Fig.6 Gain bandwith product vs. emitter current COLLECTOR OUTPUT CAPACITANCE : Cob(pF) EMITTER INPUT CAPACITANCE : Cib(pF) COLLECTOR CURRENT : Ic (A) Ta=25C f=1MHz Ic=0A Ta=25C f=1MHz Ic=0A 10 Ic max (Pulse) 1 PW=100ms PW=10ms 1000 500 200 100 50 20 10 0.1 0.2 0.5 1 2 5 10 20 50 100 1000 500 200 100 50 20 10 0.1 0.2 0.5 1 2 5 10 DC 0.1 0.01 Ta=25C Single non repetitive pulse 0.001 0.1 1 10 100 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.7 Collector output capacitance vs. collector-base voltage Fig.8 Emitter input capacitance vs. emitter-base voltage Fig.9 Safe operating area Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of 2SD2153
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |